Results 1 to 4 of 4

Thread: Fuel pump question

  1. #1
    Inactive Member HondaCivicEx98's Avatar
    Join Date
    June 6th, 2000
    Posts
    274
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Does anyone kwon when if i get a new fuel pump such as walbro, do they also come with the Bag filter attached on the pump or do i use the stock bag filter?
    thanks

    ------------------
    Rick

  2. #2
    Inactive Member zip's Avatar
    Join Date
    February 4th, 1999
    Posts
    1,160
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    http://www.autoperformanceengineering.com/

    The 255lph high pressure Walbro GSS342 (FPH003) costs $107 shipped. The intank walbros come with there own filter.

    ------------------
    Mods

  3. #3
    Inactive Member HondaCivicEx98's Avatar
    Join Date
    June 6th, 2000
    Posts
    274
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Ok thanks Zip
    Here is my problem.
    i took out the SC and eventually the walbro GSS250 would be too much for my stock.So i put back my stock pump back on and i realised that it doesnt have the bag filter. So i took off the filter of the walbro and put it on the stock pump. i am actually worry that the filter will come loose though i made sure is tight. anyway, do u know if the GSS 250 has the filter? I just dont know why would some one who installed the walbro pump would take out my stock fule pump filter off if the walbro has one.
    thanks

    ------------------
    Rick

  4. #4
    Inactive Member 5 Liter Eater's Avatar
    Join Date
    October 24th, 2000
    Posts
    402
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by zip:
    The 255lph high pressure Walbro GSS342 (FPH003) costs $107 shipped. The intank walbros come with there own filter.
    <HR></BLOCKQUOTE>

    Grrrr...Why farm out fuel pumps to Syclone guys? Not that there's anything wrong w/ Syclone fanatics, it's just that I don't see posting good advice on the board.

    Go with Jim ([email protected]), he has very similar prices and you'll get all the advice you'll need for this and future projects.

    ------------------
    Bill Winters
    Houston, TX
    '94 GSR w/ JRSC @ 6 PSI, Cartech FMU, AEM fuel rail and homemade CAI
    (ENDYN stepper pully, GS 342 and RC 310's in the garage waiting)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •